Wooden fence hand made
Wooden fence hand made
Wooden fences -
stepping to the construction of the wooden fence with their hands, you first
should think about a suitable material for him. And if the main part of the
fence will be fence, then as his legs can act metal or wooden poles.
Support for the wooden fence
Both types of columns are both advantages and disadvantages.
As for the wooden pillars, by the number of their advantages include ease of
processing, which need only a carpenter's tool. And at the same time, when installing
wooden poles special attention should be paid to them using a special
protective structures that prevent them rotting. As one of such compositions
recommended for heated bitumen. They are greased bottom of the column. Another
option would be the burning fire of the bottom of the pillars - the method has
come down to us from our ancestors.
Metal poles do not require such careful treatment, the main
thing you need to do is hermetically sealed their tops, so that the water does
not get inside the hollow tubes and paint. Most often, it is the metal pipes
are the pillars of a wooden fence.
Installing a fence poles
Preparing poles begin to digging holes in which the posts
and will be installed. Prior to this, it is necessary to partition the
territory, to determine the place under the gate and garage door, and then
start drilling holes. Their depth should not be less than 50 cm, with an
average height of the fence (1.5 m), but for the 2 meter high fence Burime pit
depth of 90-100 cm. The pits are dug along a line, the width of the step in the
2-2.5 cm . By setting poles, check their vertical position and fill the hole
with concrete solution for fixing.
Set the wooden fence with their hands
Installation of the main part of the fence begins with the
installation of cross. To do this, on top of the supporting pillars make cuts
where the cross will be attached. To mount wooden posts made by means of nails
hammered obliquely. To iron stakes for placing crossbars attached special
places. When the cross member is installed and held its control check, it is
worth attempting to install the main part of the fence. In this case, you
should decide what kind will have your fence: solid or whether it will be
viewed from the street.
In the first case, you need to nail the planks fence close.
If the boards are arranged horizontally better fasten their lap when they are
arranged vertically, you need to leave a gap of 3-5 mm. Under the influence of
precipitation fence can swell, which will inevitably lead to the deformation of
the entire fence. In that case, if you chose the second option, you need to fix
the fence boards through some distance from each other. To fence is smooth,
should be submitted two boards, and fastened at the same time one. Fence need
to nail galvanized nails.
The next stage will be the construction of a wooden fence
device protective canopy at the upper end of the fence. Installing visor device
starts with the top of the fence by additional brackets, and it has to be
fastened visors.
Visors installed on poles, made of wood, and they are
designed to protect the pillars of moisture. Due to their conical shape
rainwater will roll down the visor down. It should be noted that it is very
time-consuming and laborious work, but the effort is worth it, visors not only
protect the support of the fence, but also give the entire fence unique
individual style.
Not only the top but also the lower part of the fence in
need of protection and care. To do this, you must delete a timely manner around
the fence unnecessary grass and weeds. It is recommended to monitor
continuously because of excess vegetation inevitably leads to high humidity,
which in turn may contribute to the process of decay, extremely disastrous for
the tree. Once around the perimeter of the fence picket remove all weeds, you
need to pour a thin layer along the fence gravel. Its use does not allow
moisture to accumulate unnecessary under your wooden fence.
And when all the major work on the construction of a fence
picket is almost complete, it's time to do the application of special
protective equipment on the entire surface and painting. As protection, you can
use all the known varnish. We emphasize that neglect protective structures
should not, their use will significantly extend the life of the wooden fence.
Now, after you familiar with all the intricacies of the construction of a
wooden fence, you can safely proceed to its construction.
